成都升降機適用于一些車站啊、碼頭啊、商場啊、工廠等各個場所，有客戶反映購置的成都升降機存在偏擺現象，這是什么原因呢? Chengdu lift is applicable to some stations, ah, docks ah, shopping malls, factories and other places, there are customers to reflect the purchase of the Chengdu lift the existence of partial swing phenomenon, which is why?

1.成都升降機偏擺分為前后來回擺動和左右來回擺動，由于液壓升降機的結構原理，前后偏擺現象很少見，在這里主要說的是左右偏擺。Chengdu elevator partial pendulum is divided into before and after swinging back and forth, as a result of the structural principle of hydraulic lift, partial swing phenomenon is very rare, here is mainly said that the left and right yaw.

2.成都液壓升降機的擺動幅度，隨著升降高度的變化而變化的，升的高度越高升降機械的擺動就會越大。Chengdu hydraulic lift of the swing amplitude, with the change of the height of the lift and change, the higher the height of the lift will be the greater the swing of the mechanical.

3.成都升降機偏擺幅度最小，移動時平臺偏擺幅度略大，其偏擺幅度最大限度為3-5公分。Chengdu elevator yaw rate is minimal, when the platform moves slightly larger amplitude, the maximum limit of 3-5 cm.

4.感覺到的小幅度擺動，這都是正常反操作人員不用驚慌，在這時需要穩固好成都升降機的四周，升降機嚴禁超載。Feel a small swing, this is the normal anti operator do not panic, at this time need to firmly around the Chengdu lift, lift is strictly prohibited overloading.

5.偏擺幅度過大時應立即停止成都升降機的作業并斷開電源，請專業人士進行維修，嚴禁私自維修。Partial swing is too large, should immediately stop the operation of the elevator in Chengdu and disconnect the power supply, please professionals to repair, maintenance is strictly prohibited without permission.

成都升降機的擺動幅度應該保持在規定范圍之內，但不可漫不經心，發現問題及時處理，清除安全隱患，讓液壓升降機保質保量的完成升降作業。 Chengdu lift the swing should be kept within the scope of the provisions, but can not be casual, found that the problem in a timely manner, clear security risks, so that the quality and quantity of hydraulic lift to complete the lifting operation.